NAT audio - Innovative Audio Manufacture

Switch to desktop

Generator - replaced with Microwave (high power single ended type)

Reference Push Pull Mono Block Power Amplifier

NAT proudly introduced Generator reference high power push-pull amplifier on the base of 805 pure direct-heated triode output tube, yet zero feedback design. With power of over 120W there is capability for driving any loudspeakers both dynamic or electrostatic type.

Hand crafted symmetric wideband output transformer (custom designed for NAT) is used in this mono block. Output transformer contain no less then 63 separate layers per each output tube sum to 126 in total. Even power transformer of 700W contain 10 separate sections to supply each of amplifiers stage.

Special care has been taken in designing all high voltage regulators including for the output tubes.

The Generator is using zero global negative feedback primary to equalize characteristics for all type of loudspeakers (to have similar characteristics on dynamic and electrostatic loudspeaker as well).

Driver stage employ special quality military grade 6N6P  tubes all with few thousand hours of operational life time.

Amplifier works properly at all world wide AC line voltage from 100-240 VAC, 50Hz to 60Hz.

Audio circuit is absolutely balanced although at the same level of sound quality the single ended input option is available too.

The Generator is such a type of power amplifier that could be simple driven directly from the source (CD, SACD...).



Technical Specification
Name Value
Type Push Pull Class "A"
Power Output 120 Watts @ 8 ohms, 1kHz
Frequency Response 5 Hz to 100 kHz - 3dB @ 8 ohms
Input impedance 100 kohms
Input Sensitivity 1.5 V RMS for full power output (unbalanced input)
Gain 32 dB(x40) (unbalanced input)
Rise Time 4.4 microseconds
Noise 103 dB below rated output
Tube Complement 3x 6N6P, 2xG811
Power Requirement 110 VAC or 220 VAC @ 50 Hz to 60 Hz, 170VA at idle 500VA maximum
Dimensions 11.8" (300 mm) wide x 20.4" (520 mm) deep x 12" (300 mm) high
NET Weight approx. 66 lb. (30 kg) unpacked/ per piece
TOTAL Weight approx. 90 lb. (40.5 kg) packed/ per piece



Design Features

- push pull type
- mono block concept
- low feedback configuration
- all triode configuration
- direct heated 805 output triodes
- hand wound symmetric wide band output transformer (custom designed for NAT)
- power transformer of 700W, full encapsulated
- full regulated power supply for all stages (included the output stage)
- both balanced and unbalanced input capability
- soft start operate
- hand assembled aluminum modulated chassis
- double front aluminum panel of 0.8"(20mm) thick
- extensively used computer numeric control machines (CNC)

Specifications are subject of change without notice

 

Copyright © Nat Audio, Serbia | Developed by studiopetrov.com

Top Desktop version