There is twelve(12) tubes that works in perfect symmetry, means six(6) per each channel.
Design based on fact that preamplifier may work perfect in both type of operation-balanced (xlr) and single ended (rca).
Also, attenuation network is realized with 56 high reliability silver contact relay. Only one (vishay) resistor is always to the signal path (shunt type)!
"Symmetrical" may drive any known power amplifier no matter of type or internal impedance (compatible with input impedance of 600ohms). It also means that interconnect length between pre and power amplifier may be of enormous value.
Remote control as standard option is made from solid block of aluminum.
|Frequency Response||0.07 Hz to 300 kHz – 3 dB ; 20 Hz to 20 kHz ± 0.01 dB|
|Noise||< -95 dB "A" weighted @ 1V rms|
|Gain||15.5 dB (X 5.6 Phase status: non-inverted (0 degree)|
|THD & N||< 0.03 % 20 Hz to 20kHz @ 1V rms|
|Input Impedance||> 10 kohms single ended: >20 kohms balanced|
|Stereo Separation||> 100 dB @ 1 kHz|
|Tube Complement||2 X OA 2, 2 X PY88, 2 X 6N1P-EV, 2 X 6N2P-EV & 4 X 6N6P-I|
|Output Impedance||< 70 ohms on single ended ; <140 ohms on balanced|
|Power Requirements||110 VAC or 220 VAC @ 50 to 60 Hz, max. 100 VA|
|Dimensions||19" (483 mm) wide ´ 18" (455 mm) deep ´ 6.5" (165 mm) high (max.dimensions)|
|NET Weight||approx. 38 lb. (17 kg) unpacked|
|TOTAL Weight||approx. 58,5 lb. (26,5 kg) packed in wooden box|
- full dual mono construction with 12 tubes (6 per each channel)
- zero feedback design
- all triode pure class A configuration
- double regulated, hybrid output high precision power supply
- high current tube 6N6P double triode (military grade)
- plasma effect are used for stabilization in power supply realized with OA 2 tube (new old stock)
- vacuum tube power supply rectification with high-voltage PY88 booster diode
- high quality single audiophile grade capacitor of high capacitance on signal path
- polypropylene capacitors in high voltage power supply
- two low density silent power transformers each per channel for analog stages custom made for NAT
- soft start operate
- relay network attenuation (shunt type realised with 56 relays)
- gold plated teflon insulated RCA jacks with gold plated XLR balanced connectors
- hand assembled all aluminum modulated chassis
- laser engraved front panel made from triple separate aluminum block of 20mm thick
- laser engraved remote control made from solid block of aluminum
- extensively used computer numeric control machines (CNC)
Specifications are subject of change without notice